Fieldserver FS-8700-12 Manual do Utilizador descarregar pdf (Página 3)

FS-8700-12 DH+ Driver Manual Page 3 of 16

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]

1 ALLEN BRADLEY DH+ DESCRIPTION

The DH+ driver allows the FieldServer to transfer data to and from devices using DH+ protocol. The

Communications Adapter card is included with the FieldServer. The FieldServer can emulate either a Server or

Client.

The information that follows describes how to expand upon the factory defaults provided in the configuration files

included with the FieldServer.

2 DRIVER SCOPE OF SUPPLY

2.1 Supplied by FieldServer Technologies for this Driver

FieldServer Technologies

PART #

Description

FS-8917-19

Connector AB DH+ Driver

Config.csv

Template loaded if no custom configuration ordered, otherwise Custom

configuration loaded.

2.2 Provided by the supplier of 3

Party Equipment

2.2.1 Hardware

Part #

Description

AB DH+ compatible PLC, e.g. SLC5/03, PLC 5/40, etc

DH+ Client, e.g. RSView, Wonderware, Intellution FIX, GE Cimplicity, etc.

FS-23083

DH+ configuration cable

. Refer to Appendix A.1

2.2.2 Required 3

Party Software

Part #

Description

DL2.exe

Runs on a PC. Used only if a change to DH+ parameters (Station address, baud etc) required. Requires

DH+ configuration cable (not supplied)

Refer also to Appendix A.1

If FieldServer used as Allen Bradley DH+ Client

If FieldServer used as Allen Bradley DH+ Server

Used only if a change to DH+ parameters (Station address, baud etc) required.

1 2 3 4 5 6 7 8 ... 15 16

Sem comentários

Fieldserver FS-8700-12 Manual do Utilizador Página 3